- STARC
MEMS Weldable Pressure Transducer can be welded at the required point of use location. It is a MEMS based pressure sensor with high guage factor. It is MIL qualified, OIL field, compact & rugged Pressure Transducer. Its accuracy is better than 1% and operating temperature range is - 40°C to +125°C. All pressure components exposed to pressure are made of SS 316L. Hermeticity is ensured by leak free e-beam welding at all joints.
Application of the Product
Aerospace, Defence
Seismic Underground Detection Sensor is buried in underground for the use. It is capable of measuring signals with a frequency down to 6 Hz upto as high as 20 kHz.
It employs a thin film membrane as the sensing element for accurate measurements. Sensing element is packaged in a stainless steel housing. It is suitable for a wide range of applications in harsh environments. It is provided with 8 pin D38999 MIL Connector with ultra-low noise cable Electrical connector.
Application of the Product
Detection of seismic activity i.e. walking, running, crawling, vehicle movement detection for intruder detection.
MEMS Pressure Transducer with Digital Output is a MEMS based pressure sensor uses smart sensor technology plug and play. Sensor Calibration coefficients are stored in the sensor. It uses low current drain output format RS-422. It is MIL qualified, OIL field, compact & rugged Pressure Transducer. Its accuracy is better than ≤0.50 % and operating temperature range is - 40°C to +120°C. All pressure components exposed to pressure are made of SS 316L. Hermeticity is ensured by leak free e-beam welding at all joints.
Application of the Product
Aerospace, Defence
MEMS Pressure Transducer with Digital Display is a MEMS based pressure sensor with Embedded Driver/Controller and display size is 2.44 cm with Interface modes: I2C/IIC. It is compact & rugged Pressure Transducer. Its operating temperature range is - 40°C to +70°C. All pressure components exposed to pressure are made of SS 316L. Hermeticity is ensured by leak free e-beam welding at all joints.
Application of the Product
Aerospace, Defence
MEMS Accelerometer based Perimeter Intrusion Detection System (PIDS) is a device or sensor that detects the presence of an intruder attempting to breach the physical perimeter of a property, building, or other secured area. A PIDS is typically deployed as part of an overall security system and is often found in high-security environments such as correctional facilities, airports, military bases and nuclear plants.
Application of the Product
Border Security, Naval Bases, Harbour Entrance, Applicable on any existing barrier or fence, Perimeter security system, Safe in combustible area.
MEMS Naval Pressure Transducer is used for Naval Applications. It is a MEMS based pressure sensor MIL qualified, OIL field, compact & rugged Pressure Transducer. Its accuracy is better than 1 % and operating temperature range is - 40°C to +70°C. All pressure components exposed to pressure are made of SS 316L. Hermeticity is ensured by leak free e-beam welding at all joints.
Application of the Product
Hydraulic Pressure Monitoring, Vehicle Brake System Monitoring, Torpedo Depth Sensing, Military and Commercial Aircraft
Mechanical Pressure Switch is a field settable mechanical pressure switch with an adjustable switching range of 6 to 10 bar g. It does not require electrical power to operate and can be adjusted to the desired switching point by a simple procedure. It can be configured to operate in either Normally Open or Normally Closed state. Pigtail connector is provided in the Switch but can be customised based on customer requirement. Each sensor is tested and calibrated under the required conditions. Sensor is screened through stern environmental tests as per applicable standards.
Application of the Product
Underwater depth sensing in defence applications, Overpressure sensing for damage prevention in process control / sys.
MEMS High Temperature Pressure Transducer is used in applications where the media temperature exceeds the temperature limit of standard Pressure Transducers. It is a MEMS based pressure sensor with high guage factor. It is MIL qualified, OIL field, compact & rugged Pressure Transducer. Its accuracy is better than ≤0.50 % and operating temperature range is - 40°C to +300°C. All pressure components exposed to pressure are made of SS 316L. Hermeticity is ensured by leak free e-beam welding at all joints.
Application of the Product
Aerospace, Defence.
MEMS Compact Pressure Transducer is small in size with 0-500 bar range, is a MEMS based pressure sensor with high guage factor. It is MIL qualified, OIL field, compact & rugged Pressure Transducer. Its accuracy is better than 0.6% and operating temperature range is - 40°C to +120°C. All pressure components exposed to pressure are made of SS 316L. Hermeticity is ensured by leak free e-beam welding at all joints.
Application of the Product
Aerospace, Defence, Industrial